Deep Socket Wrench

Deep Socket Wrench

Deep Socket Wrench This handy light weight deep socket wrench, manufactured from alloy steel, is slit open along the full length to accommodate the installed cable during the tightening of the dome nut. The wrench encloses the dome nut on five sides giving the nut additional rigidity during tightening. This is especially important if a…

Read More

Locking Nuts

Locking Nuts

Locking Nuts Locking nuts with cutting edges are also available.  They penetrate the protective coating of an enclosure for a metal-to-metal connection.

Read More

Corrugated Conduit: Standard and Super Flex

Corrugated Conduit - Standard and Super Flex

Corrugated Conduit: Standard and Super Flex Standard and Super Flex Conduit The Standard corrugated conduit is made of flame-retardant nylon. The conduit is suitable for fixed and moderately flexing installations.The Super-Flex conduit is made of a special plastic blend greatly increasing the flex-life of the conduit. It is the perfect solution for drag chain and…

Read More

O-Rings and Seal Rings for Threads

O-Rings and Seal Rings for Threads

O-Rings and Seal Rings for Threads If NEMA 4x or 6 (European IP 68 – submersible) is required, O-Rings or Seal Rings (ordered separately) should be used when mounting Strain Relief Fittings to a control panel, secured with a locking nut.  The Straight Strain Relief Fittings feature a molded O-Ring groove.  For these fittings, the…

Read More

Dome Plugs – Nylon and Nickel Plated Brass

Dome Plugs - Nylon and Nickel Plated Brass

Dome Plugs – Nylon and Nickel Plated Brass Pg to NPT Adapters Materials:Body: Nickel Plated BrassO-Ring: Buna-N Deep Socket Wrench for Dome Nut Fittings This handy light weight deep socket wrench, manufactured from alloy steel, is slit open along the full length to accommodate the installed cable during the tightening of the dome nut. The…

Read More

Teflon Strain Relief Fittings – PVDF

Teflon Strain Relief Fittings - PVDF

Teflon Strain Relief Fittings – PVDF These fittings have outstanding chemical resistance and can tolerate, without problem, high and low temperatures. Use with nylon or nickel-plated brass nuts.

Read More

EMI-Proof Grounded Nickel Plated Brass

EMI-Proof Grounded Nickel Plated Brass

EMI-Proof Grounded Nickel Plated Brass SPECIFICATIONS Pressure rating: 150 PSIG (10BAR) NEMA 4X or 6 (submersible) IP68 Operating Temperature: -40°F to 212°F (-40°C to 100°C)Materials: Body, Dome & Locking nut : Nickel plated Brass Splined Bushing : Nylon 6/6 Form Seal & O-Ring : Buna-NThese liquid-tight EMI-proof grounded strain relief fittings made of nickel plated…

Read More

Straight Fittings Nickel Plated Brass

Straight Fittings Nickel Plated Brass

Straight Fittings Nickel Plated Brass Nickel Plated Brass Straight Strain Relief Fittings with Dome or Flex Nut SPECIFICATIONS: Pressure rating: 150 PSIG (10BAR)NEMA 4X or 6 (submersible) IP68Operating Temperature:-40°F to 212°F  (-40°C to 100°C) Short term exposure: 248°F (120°C) MATERIALS Body, Dome & Locking nut: Nickel platedBrassSpring (Flex extension): Stainless steelSplined Bushing: Nylon 6/6FormSeal & O-Ring:…

Read More

Push-In Fittings

Push-In Fittings

Push-In Fittings SM – Straight The fastest and most labor-saving method to connect flexible nylon conduit to a push-in fitting. The Nylon conduit is inserted into the fitting until the hook snaps over the ridge of the corrugated tubing. The conduit can be mounted rigidly for liquid tight (NEMA 4x) or turnable for non-liquid tight…

Read More